MBS Motor Mount Arm
This is the arm to use with the MBS Motor Mount clamps for the Matrix Trucks. For connection of motors to the truck. Sold each so you need two for a axle.
MBS have designed their own motor mount for their trucks to work with belt drive and makes it a simple add on to existing mountainboards. To make the full kit on MBS board you would need:
- 2 x MBS Motor Clamp Matrix 2 or 3 (depending on truck)
- 2 x MBS Motor Arm
- 2 x MBS Wheel Pulley 72T
- 2 x HTD 5M Belts
- 2 x MBS Pulley Tensioner (Optional)
- 2 x MBS Pulley Cover (Optional)
- Then you would need a motor and pulley for motor to fit 15mm wide belt. (we recommend 13T for off road riding)
These will fit all MBS Matrix II trucks, there is a different clamp for the Matrix 3 Trucks.
Note: Recommended belt size when using MBS 72T Wheel Pulley is 475mm (no idler pulley). Using a 32mm idler pulleys in the center position requires 520mm belts.
Compatible with Matrix II, Matrix III (Comes stock on MBS Comp 95 - Silver Hex and MBS Pro Warren III)
Not Compatible with ATS or ATS.12 (Comes stock on Atom 90, Atom 95X, MBS Colt 90, MBS Colt 90X, MBS Core 94)